
Data Sheet
NETWORK INTERFACE – T1
Nominal Data Rate
1.544 Mbps
Compliance
ANSI T1.403, AT&T TR-62411,
ITU-T Rec. G.703
Framing
SF, ESF
Line Code
AMI
Zero Suppression
B8ZS
Timing
Internal or loopback
Receive Signal Level
With CSU: 0 to -36 dB
Without CSU: 0 to -15 dB
Transmit Signal Level
With CSU: 0, -7.5, -15, or -22.5 dB
Without CSU: ±2.7V (±10%) at 0-655 ft
Jitter Performance
Per AT&T TR-62411
Line Type
4-wire balanced, 100
USER ETHERNET PORT
The specifications are identical to those of
the Network Ethernet port above.
USER INTERFACE – VOICE
Note: Vmux-110 is available with a choice of a
single E1 or T1 voice ports, or 4/8 FXS, FXO, or
E&M analog voice ports.
Compression Algorithms
G.723.1 (5.3 or 6.4 kbps), G.729A
(8 kbps), G.711
Silence Suppression
G.723.1A, G.729B
Echo Cancellation
32 ms per channel as per G.168
Fax Relay
Group III: 4.8, 9.6, 14.4 kbps
Modem Relay
V.22/V.22 bis
V.32/V.32 bis
V.34 up to 21.6 kbps
Voice Band Data
Transparent support for modems
Signaling
Transparent CAS, including R2 and E&M
Transparent CCS, including ISDN, QSIG and
SS7
Clear channel
MF Signaling
DTMF, MFR2, MFC detection, generation
and relay
Caller ID Relay
According to U.S. (Bellcore type 1) or
European (V.23) standards,
user-selectable
USER INTERFACE – E1 DIGITAL VOICE
Nominal Data Rate
2.048 Mbps
Compliance
ITU-T Rec. G.703, G.704, G.706, G.732,
G.823
Framing
G.732N or G.732S, with or without CRC-4
Line Code
HDB3
Receive Signal Level
With LTU: 0 to -43 dB
Without LTU: 0 to -12 dB
Transmit Signal Level
Balanced: ±3V (±10%)
Timing
Internal or loopback
Jitter Performance
Per ITU-T G.823
Line Type
120: 4-wire balanced
75: unbalanced (via adapter cable)
Connector
RJ-45
Note: CBL-RJ45/2BNC/E1 adapter cable is available
for converting the balanced E1 port RJ-45
connector into a pair of BNC connectors for
unbalanced coax interface (see Ordering).
Kommentare zu diesen Handbüchern